4 x h. 0.5m 60 Traditional Warm White Led Connectable Icicle Lights, White Cable

By choosing this battery holder for outdoor use, the connection of many string lights (up to 600 LEDs) is allowed. We recommend you to pay attention to the specified maximum amount of connectable string lights for each arrangement.

The battery holder is suitable for compatible SMART CONNECT products only. The 3 mentioned D batteries are not included.

Through the push button it is possible to select one of the 7 light functions, to select steady light effect or to turn the string off.

SKU: 56398

By choosing this battery holder for outdoor use, the connection of many string lights (up to 600 LEDs) is allowed. We recommend you to pay attention to the specified maximum amount of connectable units for each arrangement.

The battery holder is suitable for compatible SMART CONNECT products only. The 3 mentioned D batteries are not included.

Through the push button it is possible to select one of the 7 light functions, to select steady light effect or to turn the string off. Each time the button is pushed, the timer turns on: this will make the decoration work for the following 8 hours, later it will stay off for the following 16 hours and finally it will turn automatically on at the same time of the previous day.

SKU: 56404

By choosing this transformer for indoor and outdoor use, the connection of many SMART CONNECT items (up to 600 LEDs) is allowed. We recommend you to pay attention to the specified maximum amount of connectable units for each arrangement.

Through the Memory Controller contained in the power supply it is possible to select among 7 light functions and steady light. The Memory Controller allows to keep the light function selected even after turning the decoration off.

The transformer comes with a Schuko plug and a clear 4 m power cord, to be connected to the decoration through the integrated screw connector.

SKU: 56428

By choosing this transformer for indoor and outdoor use, the connection of many SMART CONNECT items (up to 600 LEDs) is allowed. We recommend you to pay attention to the specified maximum amount of connectable units for each arrangement.

Through the push button it is possible to select one of the 7 light functions, to select steady light effect or to turn the string off. Keep the button pushed, and the timer will turn on: this will make the decoration work for the following 8 hours, later it will stay off for the following 16 hours and finally it will turn automatically on at the same time of the previous day.

The transformer comes with a Schuko plug and a clear 4 m power cord, to be connected to the decoration through the integrated screw connector.

SKU: 56435

By choosing this power supply, many battery-operated SMART CONNECT lights (up to 600 LEDs) can be connected. We recommend you to pay attention to the specified maximum amount of connectable units for each arrangement.

The transformer is connected to a Memory Controller (steady light + 7 functions) that allows to keep the light function selected even after turning the lights off.

Please press the button and hold it for a few seconds, in order to turn the timer 8/16 h on. The green light on the button stays on as the timer keeps working. The timer makes the decoration work for the following 8 hours, later it will stay off for the following 16 hours and finally it will turn automatically on at the same time of the previous day.

The infrared remote control allows to operate the decoration by turning it on and off, selecting the timer, light functions and brightness level.

The transformer includes a Schuko plug and a a 4 m clear cable, useful to correctly install the decorations.

The connection of the lights and the compatible accessories (extension cables, multi-connectors etc.) is made easier by the integrated screw connectors.

SKU: 56466

By choosing this transformer for indoor and outdoor use, SMART CONNECT compatible decorations can be powered up to a maximum of 1,500 LEDs. However, it is advisable to pay attention to the maximum extendibility indicated for each decoration, even if lower than the sum of the LEDs.

As the ice light is in low voltage, to guarantee the same light intensity, it is necessary not to exceed the maximum length of 40 linear meters of ice light.

To power up to 100 meters of ice light use the multiconnectors that you find among the accessories, connecting several ice light with a maximum length of 40 meters.

For example, with the 4-output multiconnector, you could connect 3 ice light of 24 meters and 1 ice light of 28 meters in length (therefore a total of 100 meters of ice light).

The transformer integrates a memory controller with 7 light functions and steady light, selectable through the integrated button. The memory function allows you to keep the selected light effect even after turning off the decoration.

The transformer is equipped with an integrated schuko plug for connection to the home electricity grid and has 4 m of clear cable with screw connector for connection to the decoration.

SKU: 56473

By choosing this transformer for indoor and outdoor use, SMART CONNECT compatible decorations can be powered up to a maximum of 1,500 LEDs. However, it is advisable to pay attention to the maximum extendibility indicated for each decoration, even if lower than the sum of the LEDs.

As the ice light is in low voltage, to guarantee the same light intensity, it is necessary not to exceed the maximum length of 40 linear meters of ice light.

To power up to 100 meters of ice light use the multiconnectors that you find among the accessories, connecting several ice light with a maximum length of 40 meters.

For example, with the 4-output multiconnector, you could connect 3 ice light of 24 meters and 1 ice light of 28 meters length (therefore a total of 100 meters of ice light).

The transformer integrates a memory controller with 7 light functions and steady light, selectable through the integrated button. The memory function allows you to keep the selected light effect even after turning off the decoration.

Holding the button down for a few seconds will activate the 8/16 hour timer with which the decoration will work for the next 8 hours and then switch off automatically for another 16 hours. As long as the timer is active, the button will be illuminated with a green light.

The transformer is equipped with an integrated schuko plug for connection to the home electricity grid and has 4 m of clear cable with screw connector for connection to the decoration.

SKU: 56480

By choosing this transformer for indoor and outdoor use, SMART CONNECT compatible decorations can be powered up to a maximum of 1,500 LEDs. However, it is advisable to pay attention to the maximum extendibility indicated for each decoration, even if lower than the sum of the LEDs.

As the ice light is in low voltage, to guarantee the same light intensity, it is necessary not to exceed the maximum length of 40 linear meters of ice light.

To power up to 100 meters of ice light use the multiconnectors that you find among the accessories, connecting several ice light with a maximum length of 40 meters.

For example, with the 4-output multiconnector, you could connect 3 ice light of 24 meters and 1 ice light of 28 meters length (therefore a total of 100 meters of ice light).

The transformer integrates a memory controller with 7 light functions and steady light, selectable through the integrated button. The memory function allows you to keep the selected light effect even after turning off the decoration.

Holding the button down for a few seconds will activate the 8/16 hour timer with which the decoration will work for the next 8 hours and then switch off automatically for another 16 hours. As long as the timer is active, the button will be illuminated with a green light.

The practical infrared remote control allows you to activate all the decoration functions: switching on and off, activating / deactivating the timer, setting the desired play of light among the 7 available or fixed light, adjusting the light intensity (4 levels).

The transformer is equipped with an integrated schuko plug for connection to the home electricity grid and has 4 m of clear cable with screw connector for connection to the decoration.

SKU: 56510

By choosing this solar panel it is possible to power SMART CONNECT compatible decorations up to a maximum of 600 LEDs. However, it is advisable to pay attention to the maximum extendibility indicated for each decoration, even if lower than the sum of the LEDs.

The panel integrates a memory controller with steady light + 7 functions, which can be selected using the multifunction remote control supplied or with the button on the back of the panel. It is also possible to activate a 3/5/8 hour timer. The memory function allows you to keep the selected light effect even after turning off the decoration.

The internal 1200mAh PowerBank can also be recharged via electricity using the supplied USB cable and a power supply such as that of mobile phones (not included).

The solar panel is equipped with a 4 meters long clear cable.

SKU: 56527

By choosing this solar panel it is possible to power SMART CONNECT compatible decorations up to a maximum of 1.500 LEDs. However, it is advisable to pay attention to the maximum extendibility indicated for each decoration, even if lower than the sum of the LEDs.

As the icicle light is in low tension, to guarantee the same light intensity, it is necessary not to exceed the maximum length of 40 linear metres of icicle light.

To power up to 100 meters of icicle light use the multiconnectors that you find among the accessories, connecting multiple icicle lights with a maximum length of 40 meters.

For example, with the 4-output multiconnector, you could connect 3 icicle lights of 24 meters length and 1 string light of 28 meters (therefore 100 meters of icicle light in total).

The panel integrates a memory controller with steady light + 7 functions, which can be selected using the multifunction remote control supplied or with the button on the back of the panel. It is also possible to activate a 4/6/8 hour timer. The memory function allows you to keep the selected light effect even after turning off the decoration.

The internal 3600mAh PowerBank can also be recharged via electricity using the supplied USB cable and a power supply such as that of mobile phones (not included).

The solar panel is equipped with a 4 meters long clear cable.

SKU: 56534