Solar Panel with Memory Controller Connect+, up to 4000 LEDs

The solar panel is designed exclusively for Connect+ decorations and powers up to 4000 LEDs. Perfect for outdoor lighting in warmer months, where no power source is available.

It's important to note that using the solar panel leads to reduced light intensity, with maximum brightness only achieved when connected directly to the mains.

The 3600 mAh internal battery has two charging modes:

• Solar energy;
• Power supply using the included USB cable and connecting it to a USB Type A charger (such as a smartphone charger, not included)

On the back of the panel, there are two buttons to control the panel:

• MODE (green button): select between 7 light effects or steady light
• ON/OFF (red button): turn the panel on or off (disables the light sensor)

The controller features a memory function that retains the last selected light effect even after powering off.

LED indicators display the battery status, showing whether it's charging or powering the LEDs.

The panel includes a light sensor that automatically turns the lights on at dusk and off at daylight.

ADVANCED FUNCTIONS WITH CONNECT+ REMOTE CONTROL
The controller offers additional functions that can be managed exclusively via Connect+ remote control, sold separately.

Within a 4-meter range, the remote lets you:

• Adjust brightness: 4 levels – 100%, 75%, 50% and 25%
• Set a timer: 6 or 8 hours. The lights stay on for the selected duration, then turn off for 18 or 16 hours, automatically repeating daily at the same time."

Included Accessories

• USB cable to charge the panel via a USB Type A power supply;
• Removable 25 cm stake, ideal for securing the panel to the ground. It consists of two parts: by removing the tip, it can be used for wall mounting with a reduced length of 10 cm;
• 4-meter transparent power cable